How we helped a local airport become a regional go-to landing site in the case of inclement weather

We really value long-term partnerships with our clients.

ATOS® is yet another project we made with our partner AP-TECH, a consulting, design, and software company operating in the aviation industry. You can read our other three case studies about:

Clear AirSpace® - 2022 52

Clear AirSpace®

Auxiliary navigation and electronic flight bag app for pilots that competes with Jeppsen Aviator owned by Boeing
HRESS™ - 2022 52


A helipad and heliport limitation surface scanning and monitoring system
Monster® - 2022 52


Airport light surveillance system with the usage of a self-driving robot

ATOS® is the second project we did together with aviation industry experts AP-TECH. The first one was Clear AirSpace (you can read the case study here). AP-TECH offers a unique combination of a consulting, design and software development services for the aviation industry, especially airports.

After delivering an outstanding auxiliary navigation and electronic flight bag app Clear AirSpace®, we knew we are going to do some more big projects together with AP-TECH.

The Goal - Win a Higher Certificate for one of the biggest airports in Poland

This time one of the biggest airports in Poland needed a solution that would allow it to become the only landing spot in the area in case of inclement weather conditions. This would make all the air traffic controllers redirect all the flights and increase the revenue of the local airport.

The goal was to receive CAT III B certificate allowing pilots landing under the following conditions:

  • decision altitude under 15 meters (50 feet)
  • visibility along the runway (RVR) between 75 and 200 meters (250-660 feet)
 - 2022 52

Aviation Industry Has One Of The Highest Security Standards

Building software for the aviation industry is especially challenging as the solutions require redundancy for safety reasons. It's not enough to provide just one working system. The airport can't operate on one system and server. Each element needs a backup. You need duplicated solutions, and sometimes even two or three backup systems to minimize the risk. Each hardware element - routers, switches, cables, servers clusters - all needed to be duplicated.

To get the certification, the flight controllers need to see everything on the airport, even when fog reduces the visibility to a mere five meters. For a plane to land, the airport system needs to provide all the coordinates required.

Innovative Software Instead of a Pair of Additional Radars

Until recently, the only solution for improving orientation in case of low visibility was adding a new radar device. On the downside, it was a costly option. And you need to ad a pair of radars to provide the control tower with viable information. That is why with AP-TECH we went for an innovative solution based on advanced software.

The ATOSS® collects data from different sources in the airport - induction loops, transponders, etc. - and assesses the availability of landing places. The system is aware of the position of all the planes and over 400 other vehicles operating on the airport taking care of the baggage and tanking fuel.

Solving a Series of Complex Problems

Every vehicle sends us a message. To localize it we use two data sources - transponders and induction loops. It may sound straightforward, but in practice, there are several complex problems to solve. Let us give you an easy example: what happens if a vehicle passes an induction loop and then immediately stops? The system needs to provide full security, so each time when an aircraft approaches landing, the runway is empty. The tank car collision is the leading risk, and we make sure to eliminate it.

Working with AP-TECH, we developed complex logic loops to enable solving the problems above. The flight controllers see our system and app to see which areas of the airport are clear at a given moment. They can see everything on a dashboard we created for the ATOSS® system. They receive the information not only about the usage of each zone but also full operations data. If anything important or unusual happens, they receive an alert.

Partnering with Order Group proved to be a turning point for our company. Not only did we create an outstanding product that has the potential to conquer global markets, but what's even more important we learned that together we can develop more applications and systems that have the potential to disrupt the global aviation market.

Overcoming the Biggest Challenge

The biggest challenge in this kind of infrastructure projects is that they can only be tested in real conditions. ATOSS® could only be tested when there were no operations on the airport. Since about half of traffic this local airport traffic are transport planes, this happened very rarely, and usually between 1 a.m. and 4 a.m. Unfortunately, in practice transport planes are always late, so our team spent many nights at the airport waiting for an opportunity to run tests.

Thanks to our team's dedication and expertise we did it! The technical aviation goal was achieved. The airport category was lifted to CAT III B. This opened new business opportunities for this airport. It means that in case of inclement weather conditions in the region, all the flights are redirected to our client's airport.

Let's go!

If you are looking for a reliable tech partner just fill out the form and we'll take care of the rest.

We can provide you with a first estimate of the costs, timeline, and the team layout needed for your project within a week.


Karol Oponowicz
+48 793 332 793

Thank you for your message.
Fill out the form
We will reach you within the next 24hrs to discuss the next steps.

Best reads

Here are our opinions, tips and tricks for business innovators just like you.

Arrow to show directions
Show all

Best Web Frameworks and Languages To Use in 2022


5 Top Tech Trends for 2022


How to build your own CMS and why you might need one?


Order Group Among Top IoT Development Companies 2021


How can MVP help you find investors for your startup?


Off-the-shelf vs custom software development - what is the best solution for your company?


The role of research and discovery phase in creating custom software - example of the Enerace project


IoT software development for industry is a must. Read what to consider when building an app